Back
ID # 18175324

Vermeer TR626 TROMMEL SCREEN

  • Vermeer TR626 TROMMEL SCREEN
  • Vermeer TR626 TROMMEL SCREEN
  • Vermeer TR626 TROMMEL SCREEN
  • Vermeer TR626 TROMMEL SCREEN
  • Vermeer TR626 TROMMEL SCREEN
Videos
Call for Price
 Get a Quote  Get Financed  Value a Trade  Book a Demo   Get Directions  Print
Overview

Powerful workhorse making short work of processing material.

With a 6 ft/1.83 m drum and a hopper that holds 6 cubic yards/4.6 cubic meters, the TR626 makes short work of processing material. Access the drum through removable side panels, drum end or top of the drum. Its 125 hp/93.2 kw John Deere 4045 Tier 4 Final is a powerful workhorse. Impressive 72.5 ft/22.1 m conveyor features self-cleaning tail pulley and return idlers.

 
 
 
 
 
 
 
Specifications
Model
TR626 Trommel Screen
Year
2021
Sale Type
New
Manufacturer
Vermeer
chassis
Capacity
10205.8 kg
Axle/Suspension
Leaf spring
Frame Description
4 independent hydraulic jacklegs
Tires - Option One
235-75R 17.5H qty. 4
screen drum
Drum Speed
0-24 rpm
Drum Length
6.4 m
Drum Diameter
1.5 m
Drum Operation
0-33.1 gpm (0-125.3 L/min)
Drum Drive Chain
120 WT
Thrust Bearing Face
7.4 cm
Thrust Bearing Diameter
12.7 cm
Drum Support Description
Four steel trunnion rollers 8 in (20.3 cm) diameter 4 in (10.2 cm) width
fines conveyor
Rubber Flashing
Adjustable, .25" (.64 cm) thick, 4" (10.16 cm)
Fines Belt Speed
157 m/min
Head Pulley Type
Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide
Conveyor Belt Type
220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)
Conveyor Belt Width
91.4 cm
Head Pulley Bearing
2.5" (6.4 cm) pillow block
Troughing Idler Type
20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers
Fines Conveyor Length
19.8 m
Conveyor Motor Displacement
463.8 cu-cm
Conveyor Belt Stacking Height
14.5' with drum at 4 degree
screen brushes
Brush Diameter
35.6 cm
Bristle Material
Polyethylene
Brush Assembly Support
Two 1.25" (3.2 cm) sealed ball bearings
hydraulic system
Operation
62.9 gpm @ 2800 psi (238.1 L/min @ 172.4 bar [17240 kPa])
Tank Capacity
757.1 L
collecting conveyor
Idler Type
20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (61 cm) centers
Rubber Flashing
Adjustable, .25" (6.4 mm) thick, 4" (10.2 cm)
Conveyor Belt Type
220 lb (99.8 kg), 2-ply, 3/16" x 1/16" (4.8 mm x 1.6 mm)
Tail Pulley Takeup
30.5 cm
Conveyor Belt Width
91.4 cm
Head Pulley Bearing
2.5" (6.4 cm) pillow block
Head/Tail Pulley Type
Rubber-lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide
Self-Cleaning Return Idlers
7, each 4" (10.2 cm) diameter
engine - option one
Battery
950 cold cranking amps
Oil Filter
Spin-on
Air Cleaner
Dual element oversized
Engine Rating
134 hp (93.2 kW) @ 2400 rpm, 398 ft-lb (531.6 Nm) of torque @ 1600 rpm
Make And Model
John Deere PowerTech PVX 4.5L, 4045HFC93 Tier 4F
System Voltage
12 V, 120 amp alternator
Recommended Oil
Mobil 15/40
Fuel Consumption
3.5 gph (13.3 L/hr) under most operating conditions
Fuel Tank Capacity
276.3 L
Number Of Cylinders
4
Oil Volume With Filter
14.7 L
Maximum Engine Operating Angle (Operating Angles Do Not Indicate Safe Machine Operating Angles)
30 deg
engine - option two
Battery
950 cold cranking amps
Oil Filter
Spin-on
Air Cleaner
Dual element oversized
Radiator Fan
Pusher type
Engine Rating
125 hp (93.2 kW) @ 2400 rpm, 355 ft-lb (481.3 Nm) of torque @ 1500 rpm
Make And Model
John Deere 4045H Tier 3
System Voltage
12 V, 120 amp alternator
Fuel Consumption
3.5 gph (13.3 L/hr) under most operating conditions
Fuel Tank Capacity
378.5 L
Number Of Cylinders
4
Oil Volume With Filter
14.7 L
Maximum Engine Operating Angle (Operating Angles Do Not Indicate Safe Machine Operating Angles)
30 deg
features and benefits

TALL, WIDE THROAT OPENING

Move material smoothly without bridging, thanks to a tall, wide throat opening.

 

HEAVY-DUTY ROLLERS

Extend belt life even under tough loading conditions with closely set, heavy-duty rollers supporting the apron conveyor.

STARTUP DELAY AND ALARM SYSTEMS

Enhance worker safety with startup delay and alarm systems that notify your whole crew when the machine is about to start.

REDUCED SPILLAGE

Speed up your clean up because the flashing and sheeting fit tightly against the drum and conveyors to reduce spillage.

KEEP SCREEN WEIGHTS LOW

Keep screen weights low when processing wet materials by clamping on a smaller diameter tension screen wire and increasing screening area.

LOW HOPPER INFEED HEIGHT

Forget the loading ramps, since the 626 has a low hopper infeed height.

 

hopper and apron conveyor
Hopper Height
9.5' (2.9 m) from ground level at operating incline
Hopper Opening
13.2' x 5.3' (4 m x 1.6 m)
Hopper Capacity
4.6 cu m
Apron Opening Width
109.2 cm
Hopper Bottom Width
121.9 cm
Apron Conveyor Speed
0-205 fpm (0-62.5 m/min)
Apron Opening Height
86.4 cm
overs conveyor - option 1
Head Pulley Type
Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide
Conveyor Belt Size
36" (91.4 cm) wide with raised crescent
Conveyor Belt Type
220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)
Head Pulley Bearing
2.5" (6.4 cm) pillow block
Overs Conveyor Length
6.1 m
Conveyor Belt Stacking Height
3' (.9 m) x 10' (3.1 m)
Maximum Variable Overs Belt Speed
88.4 m/min
Self-Cleaning Tail Pulley Dimensions
10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft
general dimensions and weights
Weight
22543.5 kg
Capacity
Approximately 200 cu yd (152.9 cu m) per hour with .5" (1.3 cm) screens installed and material with moisture less than 40%
Hitch Weight
7565.9 kg
Operation Width
287 cm
Transport Width
287 cm
Operation Height
4.8 m
Operation Length
25.7 m
Transport Height
4.1 m
Transport Length
16.6 m
Videos Documents

logo

205 GOVERNMENT ROAD ALLOWANCE PIERSON, MANITOBA

Phone:  (204) 634-2293

 

map
<
Policy |  Privacy  |  Site Map |  Dealer Login
Copyright© 2022 Lee's Service Centre